Slide Mounting Media
Electron Microscopy Sciences Quetol 651/NSA Embedding Kit
A water miscible epoxy resin used for both light and electron microscopy. Its low viscosity permits easy infiltration and embedding, and yields light-colored blocks. Kit consists of: 225 ml Quetol 651, 450 ml NMA , 450 ml NSA, 50 ml
Electron Microscopy Sciences Technovit Medium 4000 Med Kit
Technovit 400 is a fast curing, cold polymerizing, three-component resin, which is based on a modified polyester, and it is available in the form of powder, syrup I, and syrup II. It is mixed at a ratio of 2:2:1 (powder:syrup I:syrup II). Syrup I and Syrup II are mixed together first and the powder is mixed in last. The color is white opaque.
Technovit 4000 is distinguished by its low shrinkage when polymerizing and its perfect margin fit. Due to its excellent flow characteristics, Technovit 4000 guaranteed that geometrically demanding samples are optimally embedded. Its excellent adhesion properties with regard to metal are a guarantee of gapless embedding of all metal samples. These properties are of particular importance when working with samples that require good edge definitions.
After mixing, Technovit 4000 can be used for casting for approximately 4 minutes and takes approximately 8 minutes to cure.
Newcomer Supply Permaslip Mounting Medium & Liquid Coverslip, 8 oz
Newcomer Supply Permaslip Mounting Medium is reliable and easy-to-use with excellent results as a standard mounting medium product or as a liquid coverslip (coverglass free) mounting medium. It is a clear acrylic medium that is fast drying. Permaslip Mounting Medium can also be used in tissue/cell transfer procedures to transfer tissue sections or cell preparations from a prepared microscopic slide when specimen availability is limited and additional diagnostic workup is necessary. Examples when tissue/cell transfer with Permaslip is applicable include: Paraffin sections of small biopsies/minimal tissue, Biopsies with a small foci of neoplasm, Paraffin block is unavailable, Cytology preparations, fine needle aspirates (FNA), Transfer of tissue from an uncharged slide to charged slide(s), Preparing multiple slides from a single slide preparation, Salvaging/restoring broken slides back to a whole mount. Unique spout on 8 oz cans controls drop by drop application.
Electron Microscopy Sciences Fluoro-Gel Mounting Medium with Tris Buffer 100 ML
Fluoro-Gel is a water based mounting medium designed for the permanent mounting of fluorescent stained tissues, which may either be damaged or soluble in organic solvents, such as xylene or toluene. This unique formula prevents rapid photo-bleaching of FITC, Texas Red, AMCA, Cy2, Cy3, Cy5, Alexa Fluoro 488, Alexa Fluoro 594, Green Fluorescent Protein (GFP), Tetramethylyrhodamine, Redox, Phycoerythrin (RP-E), Phyocyanin (PC), and Allophycocyanin (APC).
The fluorescence is retained during prolonged storage at 4 degree C in the dark. Application: Immunofluorescence, confocal microscope.
Research Products International Corp Mount-Quick Aqueous Mounting Media, 30 ml
Use Mount-Quick to preserve and protect laboratory specimens. Simple to use - apply thin coating to microscope slide and place coverslip over specimen. Mount-quick dries quickly and is ready for screening in minutes. Final preparation remains stable for a long period of time. Mount-Quick flows easily and eliminates trapping of air bubbles. Packaged in a convenient dispenser tube containing 30ml of media. Tube eliminates unnecessary transferring of media, only amount required is used. Mount-Quick can be removed with xylene if desired. Mount-Quick Aqueous is a water-based mounting medium for use with liparoid/lipid sections, immunohistochemically stained sections and AEC method sections.
Electron Microscopy Sciences CytoSeal™ Mounting Medium 60 Mounting Medium 16 OZ
CytoSeal 60 and 280 are toluene-based mounting mediumformulated from acrylic resins that will not crack or discolor with age. An antioxidant has been added to the formulation to inhibit fading or yellowing of stained specimens. It will not become brittle and crack, nor will it discolor or yellow with age. CytoSeal can be dissolved in toluene or xylene. Low-viscosity medium dries quickly and spreads evenly and rapidily virtually eliminating air bubbles.
Electron Microscopy Sciences CytoSeal 60, 4 oz
Premium quality; formulated from the highest quality advanced acrylic resin. It will not become brittle and crack, nor will it discolor or yellow with age. CytoSeal dries rapidly, allowing examination soon after application. It can be used with oil immersion objectives and in fluorescent procedures. Slides will not stick together and the medium will not "cold flow" to the edge of the slide during long term storage. CytoSeal can be dissolved in toluene or xylene. An antioxidant has been added to the formulation to prevent fading of slides. CytoSeal comes in a Controlled Drop Dispenser, with varying viscosities. CytoSeal 60, which has a viscosity of 60cps, is intended primarily for use with cover glass.
AdipoGen DAPI 2HCl Solution 10mM water
Chemical. CAS 28718-90-3. Formula C16H15N5 . 2HCl. MW 350.25. DAPI 4,6-Diamidino-2-phenylindole dihydrochloride is a cell permeable, fluorescent dye that is a minor groove-binding probe for DNA. Binds to the minor groove of double-stranded DNA preferentially to AT rich DNA, forming a stable complex which fluoresces approximately 20 times greater than DAPI alone. DAPI is several times more sensitive than ethidium bromide for staining DNA in agarose gels. It may be used for photofootprinting of DNA, to detect annealed probes in blotting applications by specifically visualizing the double-stranded complex, and to study the changes in DNA and analyze DNA content during apoptosis using flow cytometry. DAPI staining has also been shown to be a sensitive and specific detection method for mycoplasma. Spectral Data Excitation lambdaex 340 nm Emission lambdaem 488 nm only DAPI. Excitation lambdaex 360nm Emission lambdaem 460nm DAPI-DNA complex.
Electron Microscopy Sciences Clear-Mount, (with Tris Buffer), 30 mL
Clear-Mount is a water based mounting medium designed for the permanent mounting of hydrated tissues, which may be damaged with organic solvents. Such samples include cell smears, with peroxidase and alkaline phosphatase chromogens. This mounting medium preserves Fast Red, Aminoethylycarbazole (AEC), NBT/BCIP, INT/BCIP chromogens and is also compatible with counter-stain such as Hematoxylin and Nuclear Fast Red. It is also suitable for chromogens like DAB and DAB with Nickel and Cobalt. It is not compatible with H and E staining. Application: Mounting of Immunohisto slides.
Electron Microscopy Sciences Clear-Mount with Tris Buffer 250 ML
Clear-Mount is a water based mounting medium designed for the permanent mounting of hydrated tissues, which may be damaged with organic solvents. Such samples include cell smears, with peroxidase and alkaline phosphatase chromogens.
This mounting medium preserves Fast Red, Aminoethylycarbazole (AEC), NBT/BCIP, INT/BCIP chromogens and is also compatible with counter-stain such as Hematoxylin and Nuclear Fast Red. It is also suitable for chromogens like DAB and DAB with Nickel and Cobalt. It is not compatible with H and E staining.
Application: Mounting of Immunohisto slides.
Electron Microscopy Sciences Fluoro-Gel with Anti-Fading Agent 20 ML
Fluoro-Gel Mounting Medium with a strong anti-fading agent 1,4-phenylenediamine is an aqueous mounting medium for preserving fluorescence of tissue and cell smears. This unique formula preserves rapid photobleaching of FITC, Texas Red, AMCA, Cy2, Cy3, Cy5, Alexa Fluoro 388, Alexa Fluoro 594 tetramethyly rhodamine, and Redox. The fluorescence is retained during prolong storage at 4 degree C in the dark.
This medium contains Phynylenediamine and is not suitable for immunofluorescence of Cy dyes, Phycoerythrin (R-PR) phycocyanin (PC), and allophycocyanin (APC). Prepared from TRIS buffer. Ready-to-use mounting medium with dark coffee color, this is normal, and does not interfere with immuno-fluorescence.
Storage in temperature of 2-8 degree C is recommended. Protect from light. DO NOT FREEZE.
Electron Microscopy Sciences EMS-Mount 250 ML
EMS-Mount is a non-permanent, low viscosity an aqueous mounting medium designed for mounting of tissue sections and cell smears with peroxidase and alkaline phosphatase chromogens that cannot be dehydrated with organic solvents. This mounting medium preserves Fast red, Aminoethylycarbazole (AEC), BCIP/NBT, BCIP/INT chromogens and is also compatible with counterstain like Hematoxylin and Nuclear fast red (NFR). It is also suitable for chromogens like DAB and DAB with nickel and cobalt. (It is not compatible with H and E staining).
Application: Mounting of chromogens that cannot be dehydrated with organic solvents. Ready to use. Storage at 2-8 degree C is recommended.